Manitowoc County, Wisconsin
Village of Valders is a village in Manitowoc County, Wisconsin. Village of Valders adopts its own zoning, so inside its limits Village of Valders’s rules apply, not the county’s. 9 rules below are quoted from official sources and independently re-checked, most recently on November 12, 2026. Rules for unincorporated land are on the Manitowoc County page.
Land inside Valders village limits (Manitowoc County)
“in accordance with the authority granted by wis. stats. §60.74, 61.35, and 62.23, and for the purpose listed in §62.23, the village ordains these zoning regulations.”
Zoning districts inside Valders village
“for the purpose of this chapter, the village is hereby divided into 7 districts as follows: (a) single-family residence district (r-1). (b) single and two-family residence district (r-2). (c) multiple-family residence district (r-3) and manufactured or mobile homes. (d) business district (b). (e) industrial district (i). (f) agricultural district (a). (g) planned unit development district (pud).”
R-1 single-family residence district inside Valders village
minimum floor area per family: >= 1100 sq ft
“(g) minimum floor area per family. 1,100 sq. ft.”
R-1 single-family residence district inside Valders village
minimum lot area per family: >= 13000 sq ft · minimum average lot width: >= 100 ft
“(e) minimum average lot width. 100' (f) minimum lot area per family. 13,000 sq. ft. (g) minimum floor area per family. 1,100 sq. ft.”
“(e) minimum lot area per family. 10 acres”
R-1 single-family residence district inside Valders village
front yard: >= 25 ft · rear yard, principal building: >= 25 ft · rear yard, accessory building: >= 3 ft
“(c) minimum rear yard set back. 1. principal building. 25' 2. accessory building. 3'. (d) minimum side yard setback. 1. 2. 3. principal buildings on pre-existing lots 66' or less in width. 6' each side. principal buildings on lots more than 66' in width. 8' minimum on each side, or a 20' minimum total. accessory buildings. 3' on each side.”
“(b) minimum front yard setback. 50' (c) minimum rear yard setback. 50' (d) minimum side yard setback. 50' (e) minimum lot area per family. 10 acres”
A agricultural district inside Valders village
residential structures maximum height: <= 35 ft · other structures maximum height: <= 45 ft
“(a) maximum building height. residential structures 35' 22 other structures 45' zoning code 17.11 (b) minimum front yard setback. 50'”
“(a) maximum building height. 1.principal building. 35' 2.accessory building. 20' (b) minimum front yard setback. 25'”
We looked and could not find an official answer yet. Silence is not permission; ask Village of Valders or Manitowoc County directly.
Each answer was extracted from an official source and independently re-checked against that source by a second reviewer. That is an evidence check, not legal advice. Rules change; confirm with the authority before you buy or build.
Unanswered questions are usually a sign that Village of Valders publishes no rule on the point, not that none exists. Manitowoc County’s page lists the county offices to call.
Off-grid gear
Going off-grid in Village of Valders means bringing your own water and power. The kit we’d start with:
These are affiliate links — we may earn a commission, at no cost to you. As an Amazon Associate, Bolthole Index earns from qualifying purchases.