Bolthole Index

McClain County, Oklahoma

Zoning, building permits and septic rules in Town of Goldsby, Oklahoma

Town of Goldsby is a town in McClain County, Oklahoma. Town of Goldsby adopts its own zoning, so inside its limits Town of Goldsby’s rules apply, not the county’s. Septic permits inside Town of Goldsby come from the state health agency. 10 rules below are quoted from official sources and independently re-checked, most recently on November 6, 2026. Rules for unincorporated land are on the McClain County page.

Answers from the rulebook for Town of Goldsby

Town of Goldsby’s own rules

  • Building permitLimited

    Buildings and structures inside Goldsby town limits.

    • Minor repairs costing no more than $2,000 may occur without a building permit.
    • Plumbing, electrical, or mechanical work covered by adopted Model Construction Codes requires an appropriate permit.
    • Accessory buildings under 100 square feet may occur without a building permit only if they have no water, sewer, or electrical hookups and are not in a dedicated road or alley right-of-way or in violation of the zoning ordinance.

    minor-repair cost threshold: <= 2000 USD (Minor repairs of buildings or structures.) · accessory-building area threshold: < 100 square feet (No water, sewer, or electrical hookups; not in dedicated road or alley right-of-way; not in violation of zoning ordinance.)

    “Minor repairs of buildings or structures, the cost of which shall not exceed two thousand dollars ($2,000), may be made without obtaining a building permit”
  • Building code adoptedPartial

    Plumbing, electrical, or mechanical work on buildings or structures inside Goldsby town limits.

    • The FAQ identifies only work covered by adopted Model Construction Codes; it does not identify editions or establish adoption for every construction-code discipline.
    “all plumbing, electrical or mechanical work covered by adopted Model Construction Codes, shall require an appropriate permit.”
  • Local zoningPresent (with conditions)

    Land inside Goldsby town limits.

    • The town's official permitting page links to Goldsby's zoning and code materials.
    “Zoning & code of Ordinances & Regulations for Subdivisions”
  • Shed and accessory-building permit exemptionAvailable (with conditions)

    Accessory buildings inside Goldsby town limits.

    • The accessory building must be under 100 square feet.
    • It cannot have water, sewer, or electrical hookups.
    • It cannot be in a dedicated road or alley right-of-way or violate the zoning ordinance.

    accessory-building area threshold: < 100 square feet (No water, sewer, or electrical hookups; not in dedicated road or alley right-of-way; not in violation of zoning ordinance.)

    “Construction of accessory buildings under one hundred (100) square feet in area may also occur without a building permit”
  • Permit processPartial

    Forms published by Goldsby for permits and land-use applications.

    • The published instruction requires forms to be completed and brought to Town Hall.
    • The materials list building-permit checklist, subdivision, rezoning, floodplain, road-bore, and lot-line-adjustment forms; no full unified process was located.
    “Select the correct form below and print. Any form should be filled out completely and brought into the following location:”

Rules another office applies inside Town of Goldsby

Town of Goldsby does not set these itself; the county, a health district or the state does, and they apply to every address inside its limits.

  • Who permits septicState (with conditions)

    New or modified on-site sewage treatment systems inside Goldsby town limits.

    • This statewide DEQ program applies where an on-site sewage treatment system is installed or modified.
    • Alternative systems require DEQ approval before installation.
    “an Authorization to Construct (ATC) must be purchased and issued by DEQ.”
  • Septic permitRequired

    Installation of a new or modification of an existing on-site sewage treatment system inside Goldsby town limits.

    • An Authorization to Construct must be purchased and issued by DEQ before installation or modification.
    • The Report for On-Site Sewage must be reviewed by DEQ before the ATC may be issued.
    “Before installing a new or modifying an existing on-site sewage treatment system, an Authorization to Construct (ATC) must be purchased and issued by DEQ.”
  • Septic inspectionRequired

    New or modified on-site sewage systems inside Goldsby town limits.

    • The system must be inspected and approved by DEQ, or installed, self-inspected, and approved by a certified installer, before operation.
    • Final inspections performed by a certified installer must be submitted to DEQ within 15 days of completion.

    certified-installer final-inspection submission: <= 15 days (After completion.)

    “All new installations or modifications to an on-site sewage system must be inspected and approved by DEQ”
  • Off-grid sanitationLimited

    On-site sewage treatment used inside Goldsby town limits.

    • An ATC must be purchased and issued by DEQ before installation or modification.
    • The property report determines allowable on-site system types and minimum dispersal requirements.
    • Alternative systems require DEQ approval before installation.
    “The Report for On-Site Sewage, commonly referred to as a 581, determines what types of on-site systems are allowed for the property.”
  • Well permitLimited

    Groundwater wells inside Goldsby town limits.

    • For non-domestic wells, the drilling contractor must obtain OWRB authorization and approval before drilling.
    • Authorization is not issued without an active groundwater-use permit.
    • Authorization is not required for domestic groundwater wells used for household purposes, livestock up to land grazing capacity, and irrigation of less than 3 acres.

    domestic irrigation exemption limit: < 3 acres (Domestic groundwater wells.)

    “Any well drilling contractor who intends to drill a groundwater well for non-domestic use must apply for authorization and receive approval from the OWRB prior to drilling.”

Still unanswered

We looked and could not find an official answer yet. Silence is not permission; ask Town of Goldsby or McClain County directly.

  • Owner-builder exemption — Owner-built residences inside Goldsby town limits.
  • Inspections — Building inspections inside Goldsby town limits.
  • Certificate of occupancy — Certificates of occupancy inside Goldsby town limits.
  • Minimum dwelling size — Residential districts inside Goldsby town limits.
  • Minimum lot size — Residential districts inside Goldsby town limits.
15 more unanswered
  • Setbacks
  • Lot coverage
  • Building height
  • Living in an RV
  • Camping on your land
  • Tiny homes
  • Manufactured homes
  • Accessory dwellings
  • Mandatory utility hookup
  • Agricultural exemption
  • Subdividing land
  • Driveway access
  • Building in a floodplain
  • Short-term rentals
  • Permit fees

Each answer was extracted from an official source and independently re-checked against that source by a second reviewer. That is an evidence check, not legal advice. Rules change; confirm with the authority before you buy or build.

Unanswered questions are usually a sign that Town of Goldsby publishes no rule on the point, not that none exists. McClain County’s page lists the county offices to call.

← All of McClain County: county rules, score and offices