Sampson County, North Carolina
Town of Newton Grove is a town in Sampson County, North Carolina. Town of Newton Grove adopts its own zoning, so inside its limits Town of Newton Grove’s rules apply, not the county’s. 8 rules below are quoted from official sources and independently re-checked, most recently on November 6, 2026. Rules for unincorporated land are on the Sampson County page.
Projects within Newton Grove town limits.
“The first step is to secure zoning approval for your project location. This verifies that your plans comply with zoning regulations in your area. Here's a breakdown of who to contact: Incorporated Towns: Residents of City of Clinton, Autryville, Faison, Garland, Harrells, Newton Grove, Roseboro, Salemburg, and Turkey should contact their respective town's zoning department using the phone numbers listed below:”
Town of Newton Grove does not set these itself; the county, a health district or the state does, and they apply to every address inside its limits.
New construction projects inside Newton Grove town limits using the Sampson County permitting sequence.
“Finally, you'll need a building permit from the Inspections Office for new construction projects. To apply, you'll need to submit: Two sets of scaled plans (one set for residential projects) detailing: Foundation Floor plan Wall details All four elevations (front, back, and sides) A copy of your valid septic tank permit A copy of your valid zoning approval”
A residence, place of business, or place of public assembly inside Newton Grove that uses an on-site wastewater system.
“No person shall occupy a residence [...] until an operation permit has been issued”
Construction, location, or relocation of a residence, business, or public assembly in Newton Grove not served by an approved wastewater system.
“unless an improvement permit and a construction authorization are obtained from the local health department”
On-site wastewater disposal for development inside Newton Grove not served by an approved wastewater system.
“Any proposed site [...] shall be evaluated”
Private drinking-water wells inside Newton Grove town limits.
“Construct [...] a private drinking water well unless a construction permit has been obtained from the local health department.”
Projects inside Newton Grove subject to the county permitting process and located in a designated floodplain.
“If your property falls within a designated floodplain, you'll need to provide an Elevation Certificate to the Inspections Office before receiving final approval.”
Construction permit fees for projects inside Newton Grove town limits using the county permitting sequence.
basis of fee: total square footage (heated and unheated)
“Subcontractors (electrical, plumbing, mechanical, etc.) need to obtain their own permits based on the project's specifics. Permit fees vary depending on the total square footage (heated and unheated) of your project.”
We looked and could not find an official answer yet. Silence is not permission; ask Town of Newton Grove or Sampson County directly.
Each answer was extracted from an official source and independently re-checked against that source by a second reviewer. That is an evidence check, not legal advice. Rules change; confirm with the authority before you buy or build.
Unanswered questions are usually a sign that Town of Newton Grove publishes no rule on the point, not that none exists. Sampson County’s page lists the county offices to call.
Off-grid gear
Going off-grid in Town of Newton Grove means bringing your own water and power. The kit we’d start with:
These are affiliate links — we may earn a commission, at no cost to you. As an Amazon Associate, Bolthole Index earns from qualifying purchases.