Barton County, Kansas
Clarence Township is a township in Barton County, Kansas. 6 rules below are quoted from official sources and independently re-checked, most recently on October 30, 2026. Rules for unincorporated land are on the Barton County page.
Clarence Township does not set these itself; the county, a health district or the state does, and they apply to every address inside its limits.
Barton County zoning districts (A Agricultural, R Residential, and others in Article III) for unincorporated county land; applies inside Clarence township only where its land is mapped in a county district, which was not verified
“the a district is designed for agricultural land uses and single family-dwellings at a density no greater than one dwelling per five (5) acres.”
Non-farm single-family dwelling lots in the Barton County A (Agricultural) zoning district, unincorporated county land; applies inside Clarence township only where its land is mapped in the A district, which was not verified
minimum lot area: 5 acres (non-farm single-family dwellings; farm dwellings not covered by this line) · minimum lot width: 250 feet (non-farm single-family dwellings) · minimum lot depth: 500 feet (non-farm single-family dwellings)
“(c) lot size requirements for non-farm, single-family dwellings. (1) minimum lot area: five (5) acres. (2) minimum lot width: 250 feet. (3) minimum lot depth: 500 feet.”
“lot size requirements. (1) minimum lot area: 20,000 square feet. (2) minimum lot width: 100 feet. (3) minimum lot depth: 150 feet.”
Yard setbacks in the Barton County R (Residential) zoning district, unincorporated county land; applies inside Clarence township only where mapped in the R district, which was not verified
minimum front yard (sides abutting a street): 30 feet (sides abutting a street) · minimum side yard, residential buildings: 8 feet (each side of the zoning lot) · minimum side yard, accessory uses: 3 feet (accessory uses)
“(a) minimum front yard: thirty (30) feet on all sides abutting a street. (b) minimum side yard: (c) (f) (1) residential buildings: eight (8) feet on each side of the zoning lot. (2) accessory uses: three (3) feet.”
Maximum structure height in the Barton County R (Residential) zoning district, unincorporated county land; applies inside Clarence township only where mapped in the R district, which was not verified
maximum structure height (excluding communication towers): <= 35 feet (communication towers excluded)
“(2) the maximum structure height not to include communication towers: thirty-five (35) feet.”
Land divisions creating non-farm single-family lots in the Barton County A (Agricultural) district, unincorporated county land; applies inside Clarence township only where mapped in the A district, which was not verified
“the division of land shall not create more than two five-acre, non-farm, single-family dwelling lots within a contiguous iii-3 barton county zoning regulations ___________________________________________________ district regulations 80-acre parcel of land, and the division shall not create any new public streets, roads or easements.”
We looked and could not find an official answer yet. Silence is not permission; ask Clarence Township or Barton County directly.
Each answer was extracted from an official source and independently re-checked against that source by a second reviewer. That is an evidence check, not legal advice. Rules change; confirm with the authority before you buy or build.
Unanswered questions are usually a sign that Clarence Township publishes no rule on the point, not that none exists. Barton County’s page lists the county offices to call.
Off-grid gear
Going off-grid in Clarence Township means bringing your own water and power. The kit we’d start with:
These are affiliate links — we may earn a commission, at no cost to you. As an Amazon Associate, Bolthole Index earns from qualifying purchases.